• Steel encapsulated/particle board construction, loose laid raised access floor panels to the requirements of BSEN 12825.


BSEN rated steel encapsulated/particle board construction, screw down raised access floor panel.

Raised access floor panel complete with factory applied vinyl, linoleum, HPL, or rubber to the requirements of BSEN 12825.

PSA rated raised access floor panel complete wuth factory applied vinyl, linoleum, HPL, or rubber.

Particle board construction, lock-down raised access floor panels to the requiremens of BSEN 12825.

  • These pedestals are for use with the full range of raised access flooring systems.

access flooring

RG Series PSA (RMG) - Structural Performance

SUBSECTIONS: Overview . BENEFITS . CONSTRUCTION . PERFORMANCE . APPLICATIONS

 

   
Concentrated Load
Uniformly distributed load
Panel Grade
Panel type
Point Load
25mm x 25mm square
Load over
300mm x 300mm square
 
Light
RLG600
1.5kN
2.7kN
6.7kN/m2
Medium
RMG600
3.0kN
4.5kN
8.0kN/m2
Heavy
DRF600
4.5kN
N/A
12kN/m2

 

The above information is based on full compliance with the PSA MOB PF2 PS/SPU specification. Under the above working load conditions the panel deflection must not exceed 2.4mm based on 24hour testing. In addition to the above working loads each raised floor system carries a safety factor of 3 x working load.

 

Finished floor heights from 60mm to 1000mm are available using standard pedestals. For heights outside of this range alternative pedestals are available.

 

Extra Heavy Grade to the requirements of PSA MOB PF2 PS/SPU is available using DRF600 heavy grade with bolt-on stringers.

 

 

 


call: +44 (0) 115 946 2316 email: enquiries@mswukltd.co.uk