PSA rated steel encapsulated/particle board construction, loose laid raised access floor panels.

BSEN rated steel encapsulated/particle board construction, screw down raised access floor panel.

Raised access floor panel complete with factory applied vinyl, linoleum, HPL, or rubber to the requirements of BSEN 12825.

PSA rated raised access floor panel complete wuth factory applied vinyl, linoleum, HPL, or rubber.

Particle board construction, lock-down raised access floor panels to the requiremens of BSEN 12825.

  • These pedestals are for use with the full range of raised access flooring systems.

access flooring

RG Series BSEN (REG) - Structural Performance

SUBSECTIONS: Overview . BENEFITS . CONSTRUCTION . PERFORMANCE . APPLICATIONS

 

Panel type
BSEN 12825 classification
Ultimate load
Uniformly distributed load
RG3
3/A/3/2
In excess of 8kN
15kN/m2
RG4
4/A/3/2
In excess of 9kN
18kN/m2
RG5
5/A/3/2
In excess of 10kN
20kN/m2
RG6
6/A/3/2
In excess of 12kN
25kN/m2

 

The above info is based on testing in compliance with the BSEN 12825 specification. The classifications shown are based on a deflection under working load not exceeding 2.5mm and a safety factor of 3.

 

Uniformly distributed loads are shown for information as they do not form part of BSEN 12825. However the figures shown are based on testing in accordance with BSEN 12825.

 

Finished floor heights from 60mm to 1000mm are available using one of our standard pedestals. For heights outside of this range alternative pedestals are available.

 

The classifications given are based on the use of the Kingspan range of pedestals.

 

 


call: +44 (0) 115 946 2316 email: enquiries@mswukltd.co.uk